Bucket cylinder repair kit for excavator spare parts

bucket cylinder repair kit

Because there are many kinds of spare parts, we can’t display them all on the website. Please feel free to contact us for specific ones.

advantage

1. We supply both original and aftermarket products for you 2. From the manufacturer to the customer directly, saving your cost 3. Stable stock for normal parts 4. In Time Delivery Time, with competitive shipping cost 5. Professional and on time after service

packing

Carton Boxes, or according to clients’ request.

description

The bucket cylinder repair kit is one of many seals. It is made up of O-rings, holes, shafts, dust-proof rings and other mechanical components or parts. The details are as follows: O-shaped sealing ring: It is used in static sealing engineering. When the working pressure is greater than 20MPa, it is generally necessary to increase the retaining ring of PTFE material. Hole use and shaft use: Commonly used are combined sealing ring, V-ring, U-ring, Gly ring, Stee seal, etc. Commonly known as: V-ring for hole, Glyy ring for hole, U-ring for hole, V-rings for shafts, grids for shafts, U-rings for shafts, combined sealing rings, and seals. V-rings are generally used in heavy-duty hydraulic cylinders, with reliable sealing, and generally need to be installed in pairs back to back, with open grooves. The guiding elements of this type of seal ring generally use copper sleeves. The U-shaped ring is the most widely used and has reliable sealing. Many engineering cylinders and water conservancy cylinders use this type of sealing. Both open grooves and closed grooves can be used, and many of its guiding elements use guiding belts. The bucket cylinder repair kit is to withstand the high pressure of the mechanical system and must be resistant to high pressure, and the material of the seal must also have high mechanical strength. The low friction of the piston movement of the seal of the oil cylinder repair kit, the seal ring model must be worn during the operation process, so the sealing material should have a lower friction coefficient and higher wear resistance, and a better lubrication work state cannot be separated from the seal Intact.