delivery cylinder
Because there are many kinds of spare parts, we can't display them all on the website. Please feel free to contact us for specific ones
advantage
1. We supply both original and aftermarket products for you
2. From the manufacturer to the customer directly, saving your cost
3. Stable stock for normal parts
4. In Time Delivery Time, with competitive shipping cost
5. Professional and on time after service
Packing
Carton Boxes, or according to clients’ request.
description
The Features for Delivery Cylinder/ Concrete Cylinder Pipe:
1. Durable cylinder is made of high quality carbon steel Hardness >HRC64
2. Use advanced chromium plating process for inner wall, 0.26-0.33 mm super-thick chromium plating layer
3. Unique structure design on both ends of the flange, sharply increased the assembly precision and strength of the concrete cylinder key stress cross section structure
The Specifications for Delivery Cylinder/ Concrete Cylinder Pipe
| Product Name |
Concrete Pump Parts Delivery Cylinder/ Cylinder Pipe |
| Brand |
Zoomlion |
| Material |
Quality steel + Super thick chromium plating |
| Model Number |
DN200 |
DN230 |
DN260 |
| Product Code |
Φ200 x 1960 |
Φ230 x 2250 |
Φ260X2250 |
| Cylinder Diameter |
Φ200mm |
Φ230 |
Φ260 |
| Length |
1960mm |
2250mm |
2250mm |
| Chrome plate layer thickness |
0.25-0.3mm |
0.25~0.3mm |
0.26-0.33mm |
| Hardness on chromium plating surface |
>HRC64 |
>HRC64 |
>HRC64 |
| Service Life |
100,000m³ |
100,000m³ |
100,000m³ |
| Application |
Zoomlion Φ200x1960 Trailer Concrete Pump |
Zoomlion Φ230x2250 Low-Emission Truck-mounted Concrete boom Pump |
Zoomlion Φ260×2250 High-Emission Truck-mounted Concrete Boom Pump |
Maintenance of the pumping part
1. Check the oil quality and oil level of the hydraulic oil every 8 hours when the pump truck is working, and replenish and replace it if necessary. The newly added hydraulic oil must have the same grade as the oil in the tank. The pump truck is filled with hydraulic pressure before leaving the factory. The oil is Esso H46. Generally, when pumping 20,000 cubic meters of concrete or using it for half a year, the oil should be completely changed once. When changing the oil, the oil tank must be cleaned and the oil tanks of each part must be drained;
2. Check the oil level of the lubricating oil every 8 hours when the pump truck is working. It is recommended to use non-extreme pressure type semi-fluid lithium base grease. When pumping, there should be places where the concrete cylinder is connected to the water tank, the bearing seat of the S tube and the mixing end seat. Lubricating oil overflow;
3. After the pump truck has pumped 3000 cubic meters, the gap between the glasses plate and the cutting ring should be adjusted. If it is severely worn, it must be replaced immediately. Check that the concrete should be well sealed and no mortar seeped into the water tank;
4. After the pump truck is used for 500 hours, check the wear condition of the S tube and the bearing position of the S tube, and replace the shaft sleeve and taper sleeve if necessary;
5. Check the indication of the vacuum gauge of the suction filter of the pump truck. If the pointer of the vacuum gauge reaches the red area (that is, it exceeds 0.04Mpa), the filter element must be replaced;
6. Each system must be checked when starting up, check whether the system pressure is normal, and check whether the hydraulic system is leaking;