Joystick for excavator spare parts

joystick

Because there are many kinds of spare parts, we can’t display them all on the website. Please feel free to contact us for specific ones.

advantage

1. We supply both original and aftermarket products for you 2. From the manufacturer to the customer directly, saving your cost 3. Stable stock for normal parts 4. In Time Delivery Time, with competitive shipping cost 5. Professional and on time after service

packing

Carton Boxes, or according to clients’ request.

description

The operation of the joystick of an excavator is different from that of a car, and the joystick is in the center position in a natural state. For example, when rotating, you need to consider the inertia of the excavator. When you shake the joystick, the excavator starts to rotate. Then loosen the joystick. After the joystick is naturally centered, the excavator will continue to rotate due to inertia, so you should consider shaking during operation. The distance of the operating joystick. In addition, the large and small arms of the excavation and the expansion and contraction of the bucket use these two joysticks. With the different swing positions, the speed and strength of the action will change. Due to the difference of excavator models and brands, some excavator joysticks are equipped with function buttons that can increase power instantly. For example, the strength of the large and small arms can be increased during hoisting, and the boom speed can be increased during loading operations. The operating joystick is a proportional pressure control valve, which is installed under each operating joystick in the cab. The joystick is a kind of machinery that is convenient for workers to operate. It can output corresponding control oil pressure according to the stroke of the driver's operating joystick, so that the main control valve spool has a corresponding amount of movement to control The working speed of the working device. All parts of the joystick are precision parts, so you should be careful when operating to prevent the parts from colliding with each other or falling. Excessive knocking or prying during operation will cause burrs or damage to the parts, which will lead to problems such as failure to install, oil leakage, and performance degradation. Full attention must be paid. If left unattended after disassembly or during disassembly, the parts may rust due to moisture and dust. Therefore, when the operation is interrupted by necessity, rust and dust prevention work should be done.