Start relay for excavator spare parts

start relay

Because there are many kinds of spare parts, we can’t display them all on the website. Please feel free to contact us for specific ones.

advantage

1. We supply both original and aftermarket products for you 2. From the manufacturer to the customer directly, saving your cost 3. Stable stock for normal parts 4. In Time Delivery Time, with competitive shipping cost 5. Professional and on time after service

Packing

Carton Boxes, or according to clients’ request.

description

The start relay is a separate component, its function is to switch on, insert the attracting coil and the holding coil circuit. The function of the starter relay is to help the motor start, and the auxiliary winding is automatically disconnected after the start is completed to avoid burning the auxiliary winding coil. When the start relay fails, the compressor will gradually run out of adjustment. After the starting capacitor is started, it cannot be cut off from the circuit or the compressor cannot be started after the inverter is normally closed before starting. Operation, the cause is that the relay wire is loose, replaced, contact points are worn or welded, too dirty, uneven, coil short-circuit or open circuit, etc. For compressors that use start relays, when you hear a "humming" sound from the compressor and cannot start, check whether the start relay is correct. The main fault of the relay is the attenuation of the elastic force of the return spring, and the contact is closed when it is started and it is difficult to open. The starting current adjustment screw can be adjusted. If the adjustment screw is not easy to turn, the spring can be inserted and pulled with flat pliers until it is adjusted to normal. Why does the excavator start relay often burn? 1. The generator of the excavator may be broken. Because the generator of the excavator is broken and cannot be connected to electricity, it cannot catch fire. This needs to be repaired. If the problem is serious, the generator must be replaced. 2. Try to disassemble the battery pile head, and then reinstall it to see if it is an assembly problem, sometimes it is caused by improper assembly or circuit failure. 3. Check the starter relay or relay circuit of the machine to see if there is a short circuit or open circuit. Short circuit or open circuit will not catch fire. This needs to be found and then connected. 4. It may be that the battery clamp of the excavator is loose and cannot catch fire. In this case, just reinstall it. 5. Check the safety start relay to see if there is a short circuit.